Connecting the M.207
2.Connecting the M.207
Before starting to connect the M.207, please read the Important Safety Instructions page and the following guidelines:
Study this setup diagram (Figure 2.1). Make sure all faders are at "zero,” the Master knob is turned all the way counterclockwise, and all devices are Off.
Figure 2.1
First, connect all input sources. Next, connect your microphone and monitor headphones (located in the Front Panel, Figure 3.2). Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer and other devices into AC power. Now, switch everything on in the following order; audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers.
When turning Off, always reverse this operation by turning Off amplifiers, then your mixer, and lastly any input devices.
2
