M.207 Description (Front Panel)
3.2M.207 Description - Front Panel (Figure 3.2)
Figure 3.2
Note Considering that Channels 1 (PH1/LN1) & 2 (PH2/LN2) contain the same controls and functionality; we will only describe them once and duplicate the numbering:
1.Fader Start (FDR START): Switches the FADER START ON/OFF. This feature is used to trigger playback on a connected CD Player when the fader is used.
2.Fader Curve (FDR CURVE): This knob selects between a LONG or SHARP fade for the corresponding line fader depending on its position.
3.Fader Reverse (FDR REVERSE): Switches the FADER REVERSE ON/OFF. When Fader Reverse is engaged, the bottom of the fader is the loudest point, and the top cuts audio completely.
4.Channel Reverse (CHAN REVERSE): Switches which Channel Fader controls Input 1 and 2. If the Channel Reverse switch is in engaged (ON), then Fader 1 controls the level of Input 2, and Fader 2 controls the level of Input 1. The functionality of the Crossfader is not altered and the
5.Crossfader Curve (CF CURVE): This knob selects between a LONG or SHARP fade for the corresponding line fader depending on its position.
6.Crossfader Reverse (CF REVERSE): Switches the CROSSFADER REVERSE ON/OFF. This is often referred to as
“Hamster style.” When ON, the positions of channels 1 and 2 reverse, so moving the Crossfader full right (for instance) would open audio on channel 1.
7.Headphone Output: Standard 1/4” headphone output connector.
6
