Star Micronics 800C - page 36

27
3. Double-click on the Printers icon.
4. Click on STAR WinType 800C on
LPT1 in the Installed Printers list,
if LPT1 is the port to which this
printer is connected.
5. Click on the Setup button.
6. Click on the Options button.
7. Click on Fast Print to Port.
Putting an X in the Fast Print to Port
box will cause your print job to be sent
directly to the printer without going
through Windows Print Manager. This
will increase printing speed.
Note: Fast Print to Port works only in 386 Enhanced mode of IBM PC/AT
compatible computers.
Note: If you are linked to a network or printing to a file, do not use Fast Print to
Port.
8. Click on Use Max. Memory.
Putting an X in the Use Max. Memory
box will increase printing speed by
increasing the memory (RAM) used to
process your print job.
Note: If your application is low on memory, do not use Use Max. Memory.
If there is not enough memory when this is checked, printing speed
will not increase.
Use Max. Memory memory size varies according to the conditions
under which it is being used. Please refer to the table on the next
page for memory sizes. If Use Max. Memory is not being used,
memory size is 1MB regardless of the conditions.