Star Micronics DP8340RC user manual Control Codes

5. CONTROL CODES

CODE

FUNCTION

OUTLINE

CODE

FUNCTION

OUTLINE

CODE

FUNCTION

OUTLINE

CODE

FUNCTION

OUTLINE

CODE

FUNCTION

OUTLINE

CODE

FUNCTION

OUTLINE

LF (0A)H

Print and line feed instruction

The LF code causes the data in the line buffer to be printed, followed by a single line feed. When the line buffer is empty, only the feed takes place.

CR (0D)H

Print and line feed instruction

Same function as of LF code.

However, when the DIP switch 3 is ON, the CR code be- comes invalid.

SO (0E)H

Expanded character instruction

This code causes the printer to print expanded characters twice as wide as the regular ones. This remains in effect until a DC4 code is received.

DC4 (14)H

Release from expanded characters

The expanded character instruction is released by the DC4 code, and the succeeding data is printed as regular width characters.

ESC-1

(1B)H (2D)H (01)H or (1B)H (2D)H (31)H

Underline mode selection

All data received after this code is underlined until a ESC-0 is received.

ESC-0

(1B)H (2D)H (00)H or (1B)H (2D)H (30)H

Release from underline mode

The underline mode selection is released by this code.

– 13 –