6. GENERAL SPECIFICATIONS
Printing method | Serial impact dot matrix printing, | |||
| 9 wires |
|
| |
Number of print columns | 29 columns (10CPI), 44 columns (15CPI) | |||
Print speed | Approx. 2 lines/sec |
| ||
Print direction |
| |||
Line spacing | 1/6 inch |
| ||
Paper feed method | Friction Feed |
| ||
Paper feed speed | Approx. 12 lines/sec |
| ||
Character set | ASCII |
| 96 characters | |
| Special |
| 64 characters | |
| Block graphics* | 64 characters | ||
| Katakana (Japanese) | 64 characters | ||
Font configuration | 10CPI | Ordinary characters | 5 × 9 dots | |
|
| Block graphics* | 6 × 6 dots | |
| 15CPI | Ordinary characters | 7 × 9 half dots | |
* Graphic Feed Not Available | Block graphics* | 5 × 6 dots | ||
2.00 (H) × 2.42 (V) mm | ||||
Character size | 10CPI | |||
| 15CPI | 1.32 (H) × 2.42 (V) mm | ||
Character spacing | 10CPI | 2.55 mm (1/10 inch) |
| |
| 15CPI | 1.70 mm (1/15 inch) |
| |
Dot spacing | 10CPI | H=0.425 mm V=0.353 mm | ||
| 15CPI | H=0.340 mm V=0.353 mm | ||
Gross dot | 10CPI | 174 dots/wire/line |
| |
| 15CPI | 220 dots/wire/line |
| |
Print area | 10CPI | 73.53 mm |
| |
| 15CPI | 74.46 mm |
| |
Print Buffer | Approx. 1.5 KB |
| ||
Interface | Parallel Interface (Centronics compatible) | |||
Peripheral drive | 2 outputs (each 1A max. at 12V. Both cannot | |||
External dimensions | operate at the same time.) |
| ||
202(W) × 200(D) × 98(H) mm | ||||
(Printer) | ||||
| (without paper holder, DC Power Connector) | |||
(Power supply unit) | 60(W) × 120(D) × 36(H) mm (without AC cable) | |||
Weight |
|
|
| |
(Printer) | Approx. 1.9 kg |
| ||
(Power supply unit) | Approx. 0.4 kg (without AC cable) | |||
– 20 –
