Setting of the DIP Switches |
|
| ||
|
|
| Factory settings : all ON | |
Switch |
| Function | ON | OFF |
1 |
| Character Table | U.S.A. & Europe | Japan |
2 |
| Unused |
|
|
3 |
| CR cord | Disable | Enable |
4 |
| Unused |
|
|
5 (*1) |
| Ink Ribbon | Monochrome | |
6 |
|
|
|
|
7 |
| International Character Set (See below) |
| |
8 |
|
|
|
|
(*1) DIP Swich 5 should be set to ON when you use a
It should be set to OFF when a monochrome ribbon is used.
International Character Set
SW NO. | USA | France | Germany | England | Denmark | Sweden | Itary | Spain |
|
|
|
|
|
|
|
|
|
6 | ON | OFF | ON | OFF | ON | OFF | ON | OFF |
7 | ON | ON | OFF | OFF | ON | ON | OFF | OFF |
8 | ON | ON | ON | ON | OFF | OFF | OFF | OFF |
Note: When DIP Switches 1 is set to OFF, the printer always selects the Japan international character set regardless of the status of DIP Switches 6, 7 and 8.
When DIP Swiches 1 is otherwise set, the printer selects the character set determined by DIP Switches 6, 7 and 8.
Figure
– 26 –
