Star Micronics LS-5 EX, LS-5 TT Safety Notices, Federal Communications Commission, VDE Statement

Safety Notices

This printer iscertified w a Class I ImerpmchrctuncfertheU.S.Departmentof Healthand Human Services (DHHS) Radiation Performance Standard according to the Radiation Control fbr Health and Safety Act of 1968.This means that the printer does not emit hazardous laser radiation.

Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.

The Center for Devices and Radiological Health (CDRH) of’the U.S.Food and Drug Administmtirm implemented regulations km laser products on August 1, 1976,These regulations apply tn laser products mwketed !n the United States, The label on tbe printer indicates compliance with the CDRH regulations and must be attfichedto laser products marketed in the L’nitedSt:ites,

Caution-use of’crrntrolsor adjustments or performance of procedures other than thnse specified herein may result in hazardous radiation exposure.

Federal Communications Commission

Radio Frequency Interference Statement

Tbisequipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable pmtectinn against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause barmf’ulinterference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If tbis equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment offandon, the user isencouraged totrytoccsmectthe interference by one or more of the following measures:

. Reorient or relocate the receiving antenna.

. Increase the separation between tbe equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to wbich the receiver is connected.

o Consult the dealer or an experienced radio/TV technician for help.

For compliance with the Federal Noise Interference Standard, this equipment requires a shielciedcable.

Th(,Oh(],,(,rtuten,(tlisupp[>0111>to printers marketed in the U.S.A.

VDE Statement

This device’ carries tbe VDE RFI protection mark to certify that it meets tbe radio interference requirements of the Postal Ordinance No. 243/1991. The additional marking “Vfg. 243/P” expresses in short form that this is a peripheral device (not operable alone) wbich only individwdly meets the Class B RFI requirements in accordance with the DIN VDE 0878 part 3/1 1.89and the Postal Ordinance 243/ 1991.

If this device is operated in conjunction with other devices within a set-up, in order to take advantage of a ‘“General(Operating) Authorization” in accordance with the Postal Ordinance 243/1991, the complete set-up must comply with the Clkss B limits in accordance with the DIN VDE 0878 part 3/1 1.89,as well as satisfy the preconditions in accordance with $ ‘2and the prerequisites in accordance with $ 3 of the Postal Ordinance 243/1991.

As a rule, this is only fulfilled when the device is operated in a set-up which has been type-tested and provided with a VDE RFI protection mark with the additional marking “Vfg 243”.

Macbine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressule level It the operator position is equal m less than 70 dB(A) according to 1S0 7779.

T/7eutx)~>c stuteniei7r tipp[iesOIIIV10[Irit?tersmarLefed if]GewmrtI>