MOUNTING THE AUTOMATIC SHEET FEEDER
1. Hold the metal hopper attachment as shown in Figure l-2, and insert
it firmly into the tixihg holes on the top part of the hopper suppport.
-. _ - . . . . . . .
wgure i-2. Insert me nopper anacnmem.
2. After you’ve inserted the hopper attachment, insert the stacker attach-
ment, squeezing it with your hand, into the fixing groove in the front
part of the main body as shown in Figure l-3.
Figure 1-3. Insert the stacker attachment.
3. Check that printer power is OFF. Then remove both the printer cover
and the paper guide from the printer.
4. Move the release lever at the back of the printer to the down position
as shown in Figure l-4.
5. Move the bail lever on top of the printer forward to open the paperbail-
2