Figure l-l. Inside the carton you should have received: 1) SG-lo/15
printer, 2) paper separator, 3) paper guide, 4) platen knob, 5) spare fuse,
6) ink ribbon, and 7) this user’s manual.
.
-_
Let’s move on the next step . . . --
H Removing the printer cover
What is cover for, really? Primarily, for two reasons: one, to
keep dust and dirt away from the delicate “innards,” and two,
to keep the noise level down. So, you should keep the cover on
all the time, except when setting the ink ribbon in place, loading
paper. or making other adjustments when the cover might be in
the way.
To remove the printer cover, lift up the front end, and pull
out the two tabs at the back edge of the cover from the two slots
of the case, and off the machine. To replace, just reverse the
procedure. Figure l-2 illustrates the proper position and
movement for both removal and replacement of the cover.
--
-
2