Star Micronics SG-10, SG-15

When you run this program it will print 150 lines right down

the page and across the perforations. When it’s done line 60 sends

a form feed to advance the paper to the top of the next page.

Look at the lines that have printed near the perforations. Separate

the sheets and see if any of the lines have been torn in half. These

are the problems that the top and bottom margins will solve.

Now add the following lines to your program. (Don’t forget

the semicolons or you won’t get quite the same results that we

did.)

11 'Leave 6 blank lines at bottom of page.

12 LPRINT CHR$(27) "N" CHR$(6) ;

13 'Start top of page at line 6.

14 LPRINT CHR$(27) "R" CHR$(6) ;

55 LPRINT CHR$(27) "0" ; 'Clear top & bottom margins.

Now when you run the program with STAR mode SG-lo/15

will skip the first six lines and the last six lines on each page.