Paper roll holder
Tear Bar Model
Note: When using a paper roll with an
57.5mm width, install the paper roll holder in the groove in the printer.
If a paper roll with a 57.5 mm width has been used, a paper roll with a
79.5mm width cannot be used. (Changing from the smaller roll to a larger roll will cause part of the print head to rub against the platen and deteriorate.)
3)Push down both sides of the printer cover to close.
Note: Make sure that the printer cover is securely closed.
4)Tear Bar Model:
Tear off the paper as shown.
Auto Cutter Model:
If the printer cover is closed after turning on the power, the cutter op- erates automatically and the front end of the paper is cut.
– 8 –