Introduction
Packaging Contents
•1x USB 3.0 Dual System Swap Adapter
•1x Driver CD
•1x Instruction Manual
System Requirements
•Available USB 2.0/3.0 port (USB 3.0 recommended)
•CPU: Intel Core i3 2.8GHz or higher
•RAM: 2GB memory or higher
•Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64)
Installation
Notes:
•The adapter should not be connected to either system until the software is installed and the system has been restarted.
•It is not recommended to connect the USB 3.0 Dual System Swap Adapter via an external USB Hub.
•It is recommended to un‐install other USB to Graphics drivers before installing USB 3.0 Dual System Swap adapter drivers (they can be
1.Insert the included Driver CD into your CD/DVD drive.
2.On the first of your 2 systems that will be connected to the adapter, run the Setup. exe application from the Autoplay menu. If Autoplay is disabled on your system, browse to your CD/DVD drive and run the application.
Instruction Manual
2
