The following keys are available in MAINTENANCE MODE:
Upper and Lower Data Information Window SCROLL Keys: Display the next and previous parameters, respec- tively. Keys will repeat if held.
Increase and Decrease LEVEL Keys: Adjust the value of the displayed parameter up and down, respectively, in incre- ments of 1 unit . These keys do not save the new value - see OK Key below.
OK Key: Updates (saves) the values of all parameters in Flash memory, and exits Maintenance Mode.
NOTE: To exit Maintenance Mode without saving any values or settings, press the QUICK START key.
The items that you may display and change with the previous keys are:
| Lowest | Highest | Default |
|
Item | Value | Value | Value | Meaning |
|
|
|
|
|
Serial No | 0 | 65535 | 0 | Serial number (set by factory) |
Date | 01/00 | 12/99 | 01/05 | Manufacture date for the TOTAL BODY TRAINER (set by factory) |
Display Vers 1 | 01.00 | 99.99 | N/A | Display panel software version (set by factory) |
Display Vers 2 | 01.00 | 99.99 | N/A | Display panel software version (set by factory) |
LCB Vers | 01.00 | 99.99 | N/A | Load Control Board software version (set by factory) |
Units | English | Metric | English | English = units of pounds, miles, feet, inches; |
|
|
|
| Metric = units of kilograms, kilometers, centimeters. |
Time | 5 | 99 | 99 | Maximum time in minutes allowed for program, excluding |
Weight | 50 (Lb) | 350 (Lb) | 350 lbs | Default (to user), typical weight in lb (UNITS=English), or kg |
| 22 (KG) | 158 (KG) | 158 (KG) | (UNITS=Metric). |
Language | N/A | N/A | ENGL | Language is English (ENGL), Dutch (DUTC), French (FREN), German (GERM), |
|
|
|
| Portuguese (PORT), Spanish (SPAN), Swedish (SWED), Italian (ITAL) or Katakana |
|
|
|
| (KATA). |
Model | N/A | N/A | ||
|
|
|
| |
|
|
|
| PRO CT = |
|
|
|
| |
|
|
|
| STEPPER = Pro Stepper |
LCB TYPE | N/A | N/A | VERI | Type of LCB detected by display. |
CSAFE | N/A | N/A | OFF | Turns on/off CSAFE functionality. |
Auto Status | N/A | N/A | OFF | Turns on/off the unsolicited status of the CSAFE feature. |
Wall Power | N/A | N/A | OFF | Turns the wall power setting on/off. |
IRDA | N/A | N/A | OFF | Turns on/off infrared port functionality. |
OPER Hours | 0 | 65535 | 0 | Total operating hours. |
Quick Start | 0 | 65535 | 0 | Number of times the Quick Start program was run since last reset. |
Manual | 0 | 65535 | 0 | Number of times the Manual Program was run since last reset. |
TB Begin | 0 | 65335 | 0 | Number of times the Total Body - Beginner program was run since last reset. |
TB Inter | 0 | 65335 | 0 | Number of times the Total Body - Intermediate program was run since last reset. |
TB Diff | 0 | 65335 | 0 | Number of times the Total Body - Difficult program was run since last reset. |
Auto Pilot | 0 | 65535 | 0 | Number of times the Auto Pilot Program was run since last reset. |
IHR Prog | 0 | 65535 | 0 | Number of times the Interval Heart Rate Control Program was run since last reset. |
| Lowest | Highest | Default |
|
Item | Value | Value | Value | Meaning |
|
|
|
|
|
26 | STAR TRAC TOTAL BODY TRAINER OWNER’S MANUAL |
