STEP4
Remove the cap cover with the Star Trac logo from the plastics by removing the (2) screws using a #2 Phillips screwdriver. Retain the screws for later use. You will no longer need the cap cover and, if desired, you can store it away for any possible future use.
STEP5
Remove the (2) M8 button head screws retaining the cross brace using the 5mm Hex Key. Found in the hardware kit. Retain the screws for later use. You will no longer need the cross brace and, if desired, you can store it away for any possible future use.
STEP6
Take the TV neck bracket from the package. Install the
(4)M8 Button head Screws through the TV neck bracket into the display mount. Note: (2) of the screws are in the PVS kit, (2) retained from earlier step. Do not tighten them at this time.
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION | 8 |
