StarTech.com S3510BMU33, S3510SMU33

Instruction Manual

4. Slide the Hard Drive Tray back into the Metal Enclosure.

5. Mount the Hard Drive Tray to the Metal Enclosure by inserting 2 of the smaller

included screws into either side of the enclosure. Fix them into place using a

Screw Driver.

6. With the enclosure fully assembled, connect the power adapter from an available

AC outlet to then enclosure. Connect the USB 3.0 cable from the enclosure to a USB

port on the host computer system.

7. Slide the Power switch to the “on” position.

Contents

Main FCC Compliance Statement Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols Table of Contents Page Introduction Packaging Contents System Requirements Installation Page How to Use Connecting the Hard Drive LED Indicator Disconnecting the Hard Drive Windows Initializing the Hard Drive Specications Technical Support Warranty Information Limitation of Liability