Installation
WARNING! Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Be sure that you are properly grounded by wearing an
1.Open the enclosure by sliding the Hard Drive Tray out of the Metal Enclosure.
2.Connect the the 3.5” SATA Hard Drive to the SATA connector on the Hard Drive Tray.
3.Mount the Hard Drive to the Hard Drive Tray by inserting 4 of the larger included screws into the bottom of the Hard Drive Tray. Fix them into place using a Screw Driver.
Instruction Manual
3
