StarTech.com ST1000BT32 manual Introduction, Before You Begin, System Requirements, Contents

Instruction Manual

Introduction

Thank you for purchasing a StarTech.com 110/100/1000 Mbps PCI Ethernet Card. Featuring Auto-Negotiation capability and support for data transmission bandwidth up to 2000Mbits/sec, the card is easy to install and set up, and is fully Plug and Play compatible in a wide range of operating environments.

Features

•Automatically configures IRQ and I/O addresses

•Two LEDs indicate network link/activity and 10/100 or 1000Mbps selection.

•Supports 32-bit PCI Bus Master for high performance and low processor utilization

•Supports early interrupt on transmit for increased performance

•Supports 32-bit 33/66MHz PCI Local Bus Master for high-speed operation

Before You Begin

System Requirements

•An IBM compatible notebook computer with a Pentium-based processor

•An open PCI slot

•One of the following operating environments: Windows Vista/XP/ME/2000/98, Windows NT, Linux, NetWare 3.x/4.x, Lan Manager, TCP/IP software

Contents

This package should contain:

•1 x PCI Ethernet Adapter card

•1 x Driver disk

•1 x Installation Guide

1