StarTech.com ST121UTPDVEU, ST121UTPDVI, ST121UTPDVGB Wiring Diagram, Specifications

Models: ST121UTPDVGB ST121UTPDVEU ST121UTPDVI

1 2
Download 2 pages 32.36 Kb
Page 2
Image 2

Wiring Diagram

The UTP cable must be wired according to the EIA/TIA 568B industry standard as shown below.

Pin

Wire Color

Pair

1

White/Orange

2

2

Orange

 

3

White/Green

3

4

Blue

1

5

White/Blue

 

6

Green

3

7

White/Brown

4

8

Brown

 

FCC Compliance Statement

Specifications

Video Signal

DVI-D (digital)

Connectors

1 x DVI-I (29-pin) female

1 x RJ45 Ethernet female

 

1 x DC Power female

Maximum Video

1600x1200 @ 60Hz

Resolution

 

Maximum Distance

45m / 150ft

Power Adapter

5VDC, 1000mA, center positive,

type H plug

 

Enclosure Material

Metal

Dimensions

67.0mm x 52.0mm x 38.0mm

Weight

138g

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads.

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Page 2
Image 2
StarTech.com ST121UTPDVEU, ST121UTPDVI, ST121UTPDVGB instruction manual Wiring Diagram, Specifications

ST121UTPDVGB, ST121UTPDVEU, ST121UTPDVI specifications

StarTech.com has long been a reliable provider of connectivity solutions, and its line of HDMI over Cat5/6 extenders, including the ST121UTPDVI, ST121UTPDVEU, and ST121UTPDVGB, showcases the company's commitment to delivering high-performance video and audio transmission over extended distances. These extenders are designed to transmit DVI signals over standard Cat5 or Cat6 cabling, making them ideal for various applications in homes, offices, or commercial venues.

A standout feature of the ST121UTPDVI and its variants is their ability to extend DVI video signals up to 150 meters (492 feet) while maintaining the quality of the original video. This capability is particularly beneficial in settings where long-distance connections are imperative, such as in conference rooms, digital signage, or control rooms. The extenders support resolutions up to 1920x1200, ensuring that users do not compromise on image quality, even when transmitting over long distances.

The ST121UTPDVI series employs advanced technology, including built-in equalization and signal boosting, which provide a stable connection by automatically adjusting for different cable lengths and types. This technology allows users to achieve optimal performance without the need for manual adjustments or complicated configurations.

Additionally, the extenders feature a compact and rugged design that makes installation simple and straightforward. With a plug-and-play setup, users can easily connect the transmitter and receiver units with minimal effort, making these devices accessible to both tech-savvy individuals and those less familiar with audio-visual equipment.

Compatibility is another significant advantage of the StarTech.com extenders. The devices are designed to work seamlessly with a range of operating systems and display devices, including monitors, projectors, and televisions. This versatility means they can be integrated into various setups without the need for additional software or drivers.

Other notable features include LED indicators for power and signal status, which provide visual confirmation of operational status, and a durable construction that ensures longevity even in active environments. Whether it’s for enhancing corporate presentations, educational environments, or retail displays, the ST121UTPDVI series stands out as a reliable solution for high-quality DVI signal extension.

In summary, StarTech.com’s ST121UTPDVI, ST121UTPDVEU, and ST121UTPDVGB extenders represent a powerful combination of technology, performance, and ease of use, catering to the needs of users looking for efficient video transmission solutions.