![](/images/new-backgrounds/1170655/170655111x1.webp)
SVx41HDI Series Server Remote Control: Instruction Guide
Baud rate: 115200 bps, 8N1
Connected to #1: (none)... (Press
You are now connected to the
# - Send break
H – Hangup line (drop DCD) E – Send
L – Low log entries (line buffer)
1 – Show last 10 log entries other – Return to connection
Press key
To execute the desired command, simply press the corresponding key on the keyboard. You can also execute the command and avoid the menu by pressing the [Ctrl] – [Shift] – [_] key combination quickly and pressing the letter of the command. To quit the menu, press [Q] on the keyboard when the menu is active.
Remote Login via SSH
You can also use a standard SSH client to access the
Login in to the SSH session as admin using the same password as the Web interface. At the command prompt type connect x (where x is the number of the
Operating Notes
•Hardware handshaking (CTS/RTS) is required for speeds exceeding 9600 bps. It is enabled by default on the SVx41HDI, but may need to be enabled on the other end of the connection. For Unix systems, the command is:
stty –crtscts < /dev/[serial port]
•
•A maximum of four users may simultaneously login to the same device. All users may type commands at any time, and all users will see the same output. Note the following:
•All users have equal access to all channels.
•A maximum of 16
53