StarTech.com SV3254DX4I, SV1654DX4I instruction manual Accessing the Web Interface

3.Click Create a new connection under Network Tasks.

4.The New Connection Wizard window will open. Click Next.

5.Select Connect to the Internet, then click Next.

6.Select Set up my connection manually, then click Next.

7.Select Connect using a dial-up modem and click Next.

8.In the space provided under ISP Name, type an appropriate name of your choosing for the connection, then click Next.

9.In the space provided under Phone Number enter the phone number for the line to which the SVxx54DX4I’s modem is connected. You may need to add the area code, country code, or other digits needed to access the outside line as appropriate. When finished, click Next.

10.Make your choice from Anyone’s use or My use only and click Next.

11.Beside User name, enter the user name of any valid user created using the Web interface of the SVxx54DX4I. Beside Password and Confirm password enter the password that the user you entered above uses to access the Web interface.

12.This screen also includes three checkboxes - remove all checkmarks, then click Next.

13.You may select to add a shortcut to the desktop for this connection.

14.Click Finish.

Accessing the Web Interface

Once a dial-up connection has been established, you can access the Web interface or start a VNC session using the following IP address: https://99.99.99.99

You can now login to the Web interface (and/or VNC session) normally.

Note that the remote machine (the one from which you dialed) is automatically assigned the IP address 99.99.99.100 for the PPP session.

51