Minuteman UPS SNMP-32 Series user manual Set Snmp MIB System, Set Snmp Access Control, Set Email

4. Telnet Main Menu screen (Fig. 32).

Fig. 32-Telnet: Main Menu

•Set IP Address

This function is for setting the IP Address, the Gateway Address, and the Subnet Mask.

•Set SNMP MIB System

This function is for setting the MIB System Group parameters.

•Set SNMP Access Control

This function is for setting the IP Manager, the Community String, and the Access Permission.

Note: The configuration of ‘Set SNMP Access Control’ is only used for SNMP Network Manager.

•Set SNMP Trap Notification

If you want to use a PC and perform the ‘Trap’ function of the SNMP manager to manage the RPM through SNMP-32 card, the IP address of the PC must be added in this list of SNMP-32 card.

Note: The configuration of ‘Set SNMP Trap Receiver’ is only used for SNMP Network Manager.

•Set System Time & Time Server

This function is for setting the System Date, and the System Time.

•Set Web and Telnet User Account

This function is for setting the user’s account authorization.

•Set Email

This function is for setting the email accounts to receive power event notification.

•Reset Configuration to Default

This function is for setting all values to their default settings.

•Save & Reboot

This function is for saving the current configuration (including any/all changes that were made) and then rebooting the SNMP-32 card.

•Exit Without Saving

This function is for exiting the configuration setup without saving any/all changes that were made.

22