Minuteman UPS SNMP-32 Series user manual Information System Status, Configuration Network

4-2. Information: System Status

This screen shows the SNMP-32 card’s System Information and Network setting (Fig. 12). The information shown is provided by SNMP-32 card or it is the user settings from the SNMP Utility Configuration pages.

1.System Information:

This section shows the System Information. The Firmware Version, the Serial Number and the System Time are provided by SNMP-32 card. The other information is the user settings from the SNMP Utility Configuration pages.

2.Network Status:

This section shows the Network settings. The MAC address is provided by SNMP-32 card. The other information is the user settings from the SNMP Utility Configuration pages.

Fig. 12-System Status Screen

4-3. Configuration: Network

This screen is to set the Network settings (Fig. 13).

NOTE: SNMP-32 card will reboot after making changes to any of the following sections.

1.IP Address:

This section is to set the IP address.

2.Subnet Mask:

This section is to set the Subnet Mask.

3.Gateway:

This section is to set the Gateway.

4.Obtain an IP address:

This section is to choose to set the IP address manually or via DHCP.

NOTE: The four sections above can be set in either the SNMP Utility or the SNMP-32 card’s Web pages.

5.Primary DNS Server IP:

This section is to set the Primary DNS Server IP address.

11