Manuals / Minuteman UPS / Computer Equipment / Network Router

Minuteman UPS SNMP-32 Series UPS Control, Quick Battery Test, General System Test, Cancel Test

Models: SNMP-32 Series

1 40

Download 40 pages 16.9 Kb

Page 25

3.UPS Control

3.UPS Control

This screen is to provide remote UPS test functions (Fig. 35). Choose the test item and click on 'Apply' to execute the test.

Quick Battery Test

The Quick Battery Test function will test the battery for 5-seconds.

General System Test

The General System Test function will test the UPS and the battery for-15 seconds. This test can only be performed when the battery is fully charged.

Deep Battery Calibration

The Deep Battery Calibration function will test the UPS and the Battery until Low Battery Warning (LBW). When this test is performed, the UPS will switch to the battery mode and operate until the Low Battery Warning alarm occurs. Then the UPS will switch back to the normal AC mode.

Cancel Test

The Cancel Test function is to abort a test while the test is in progress.

Shutdown UPS (Battery mode only)

Selecting 'Shutdown UPS' will turn off the UPS. This function can only be performed in the battery mode. The UPS will automatically restart when AC returns.

Put UPS in Sleep mode for XX minutes

When the UPS is in the Sleep mode, it will not provide power to the outlets. The UPS will restart once the Sleep mode function is complete.

Cancel Shutdown

The Cancel Shutdown function is to abort a shutdown while a shutdown is in progress.

Audible alarm

•Disabled: Turn off the audible alarm.

•Enabled: Turn on the audible alarm.

•Muted: Mute the audible alarm until an event occurs (Fault, LBW).

•Disabled Until Low Battery Warning: Turn off the audible until a Low Battery Warning occurs.

Fig. 35-UPS Control Screen

25

Image 25

Minuteman UPS SNMP-32 Series UPS Control, Quick Battery Test, General System Test, Deep Battery Calibration, Cancel Test

Contents

SNMP-32 Series Web-based monitoring SNMP cardUser’s Manual 34000241 Rev1Table of Contents Conventions used in this guide TrademarksNote Notes contrast from the text to emphasize their importance Copyright Para Systems, Inc Unauthorized reproduction prohibited1. Introduction 1-1. FeaturesFig. 1-SNMP-32L Card Internal SNMP-32 card Package Contents 1-2. Package ContentsFig. 2-SNMP-32S Card Status LED TableSNMP-32 card and the RPM Remote Power Manager External SNMP-32 card Package Contents SNMP-32L OnlySNMP-32 card and the ATS Automatic Transfer Switch 1-3. ApplicationsInternal SNMP-32 card 2. Installation ProcedureExternal SNMP-32 card SNMP-32L Only Fig. 3-Internal SNMP-32 CardFig. 7-SNMP Utility Configuration Menu 3. Setup-ProcedureFig. 5-SNMP Utility Group Fig. 6-SNMP Utility Network SelectionFig. 8-SNMP Utility Set IP address for SNMP-32 card Fig. 9-SNMP Utility Advanced setting of SNMP-32 card2. Configuration Fig. 10-SNMP-32 card Login Screen4. Web Management Interface 4-1. Main Menu4-2. Information System Status 4-3. Configuration Network1. System Information 2. Network Status2. Access Control 4-4. Configuration SNMP6. Secondary DNS Server IP 7. Ethernet Connection TypeFig. 14-SNMP Screen Fig. 15-Event Screen 3. Trap Notification1. Email Setting 4-5. Configuration Email2. Recipient’s Email Address for Event Log 3. Recipient’s Email Address for Daily Report4-7. Configuration Web/Telnet 4-6. Configuration PPPFig. 17-PPP Screen 1. User Account1. Internet Time Setting 4-8. Configuration System Time4-9. Log Information Event 2. System Time Format mm/dd/yyyy hhmmssCPS Event List ENV Event ListATS Event List Fig. 20-Event Log Screen 2. Save Event Log1. Data Log 4-10. Log Information DataFig. 22-Data Log Screen 2. Save Data Log Fig. 23-Save Event Log ScreenFig. 26-SNMP Utility Configuration Menu 5. Firmware Upgrade ProcedureFig. 24-SNMP Utility Group Fig. 25-SNMP Utility Network SelectionFig. 28-SNMP Utility Download Firmware Complete Fig. 27-SNMP Utility Download FirmwareFig. 31-Telnet Login 6-1. Telnet Configuration6. Telnet Fig. 29-Telnet StartupReset Configuration to Default Set SNMP Access ControlSave & Reboot Fig. 32-Telnet Main Menu Set IP AddressBattery Information 7-1. Uninterruptible Power Supply UPS7. Connected Device 1. UPS Information2. UPS Status Battery StatusUPS Status Input StatusDeep Battery Calibration Quick Battery TestCancel Test Shutdown UPS Battery mode onlyFig. 36-Graphic View Screen 4. Graphic ViewFig. 37-Set Thresholds Screen Fig. 38-Log Graphics ScreenFig. 39-UPS Settings Screen 6. UPS Schedule 5. UPS SettingsUPS Properties UPS RecordedFig. 42-RPM Action Screen Fig. 41-New Schedule Event Screen 7. RPM ActionFig. 43-RPM Action Screen 1. RPM Status Fig Select RPM 7-2. Remote Power Manager RPMOutlet A-H Outlet ControlPower off Delay 2. RPM Setting Fig Select RPMPower Resume Delay Fig. 45-RPM Setting ScreenFig. 46-RPM Schedule Screen 3. RPM ScheduleFig. 47-New Schedule Event Screen Fig. 49-CPS Configuration Screen Fig. 48-CPS Status Screen 2. CPS Configuration Fig Name7-3. Current Probe Sensor CPS 1. CPS Status FigFig. 51-ENV Configuration Screen Fig. 50-ENV Status Screen 2. ENV Configuration Fig7-4. Temp/Hum32-Probe ENV 1. ENV Status FigFig. 52-Automatic Transfer Switch Screen 2. ATS Configuration Fig 7-5. Automatic Transfer Switch ATSInput Power Source A Input Power Source BGeneral Network Management Stations 8. Configuring the NMSHP OpenView Network Node Manager for HP-UX Compile the Device MIB Add the SNMP-32 card Object to the Management MapCommunities 9. AppendixGateways IP AddressesSubnet Mask Routing and Filtering Problem 10. TroubleshootingProblem ProblemWhat are the symptoms? Installation Site11. Obtaining Technical Assistance If you are a consultantLIMITED PRODUCT WARRANTY 12. Limited Product Warranty