Minuteman UPS SNMP-32 Series user manual Trap Notification, SNMP Screen -Event Screen

3.Trap Notification

A.Receiver IP Address:

This section is to set the receivers IP address for receiving traps sent by SNMP-32 card. It is valid for up to eight IP Addresses.

B.Community:

This section is to set a Community name for NMS. The community name has to be the same as the setting in NMS.

C.Severity:

This section is to set the Trap receiver levels. There are three levels for the Trap receiver: Information: To receive all traps.

zWarning: To receive only “warning” and “severe” traps.

Severe: To receive only “severe” traps. (Please refer to NMS User’s Manual for Trap levels).

D.Acceptance:

This section is for authorizing the receiver to receive a trap or not.

E.Description:

This section is for an administrator to make notes.

F.Events (Fig. 15):

This section is to select events for SNMP-32 card to send traps. Clicking on Select will open a Select Events List. Event Traps may be selected from this list.

Fig. 14-SNMP Screen

Fig. 15-Event Screen

13