This chapter presents the specific operating aspects and system data provided by the "GTCZ" and "GT2Z" boards in unitary UPSs. For more detailed information, please refer to the "system information" section.
Block diagram
Unitary UPS
Q4S a
Mains 2
rectifier- charger
Q1
Mains 1
b
Q3BP
static
inverter
K3N Q5N
load
e | c | d |
Measured quantities
QF1
battery
a | F Mains 2 | <1A2> | U | Mains 2 | <149 to 14E> |
|
|
| I | Mains 2 | <109 to 10B> |
b | F Mains 1 | <1A0> | U | Mains 1 | <140 to 142> |
c |
|
| I | Mains 1 | <100 to 102> |
F inverter |
| U | inverter |
| |
| <1A1> | <143 to 148> | |||
d |
|
| I | inverter | <106 to 108> |
F load |
| U load |
| ||
| <1A3> | <14F to 154> | |||
|
|
| I | load | <10C to 10E> |
| Apparent and active |
|
|
|
|
e | power | <180 to 187> |
|
|
|
I battery or I dc |
| U battery or U dc |
| ||
| <115 or 1C1> | <155 or 1C0> | |||
| Battery backup time | <1C2> | Battery temperature | <1C3> | |
The numbers enclosed by <> are the addresses in the data array.
6739389EN/FB - Page 21
