Sterilite Point-of-Use Drinking Water System Installation, A. Stand Mounting, B. Wall Mounting

INSTALLATION

Shipped with the faucet diverter, your Sterilight unit is ready for installation on most kitchen faucet heads.

A. STAND MOUNTING:

Find a suitable location for your unit, and simply place it with the stand provided. Excess hose and/or power cord may be wrapped inside the unit’s stand (Figure 2).

B. WALL MOUNTING

1.To wall mount the unit, you must first

remove the		Figure 2
		Counter-top stand mounting
counter-top stand.
This stand is
secured to the unit		OUTLET
with two
semi-permanent
adhesive pads.
They can be pried		INLET
loose by pulling	Figure 3	OUTLET
firmly down on the
back of the stand	Counter-top stand removal
or by using a
screwdriver or
lever to pry the
stand from the
bottom of the unit
(Figure 3). Once
the stand is		OUTLET
removed, the
adhesive pads can		INLET
be peeled off from	Figure 4	Figure 5
the stand and/or	Adhesive pad removal	Diverter valve hose routing
bottom of the unit
(Figure 4).

The adhesive pads are not required for the stand to function.

The Diverter valve hoses attach (Figure 5), with the hose to the top of the diverter attaching to the inlet elbow, and the hose to the bottom of the diverter attaching to the outlet tube.

4