Sterling 882.00291.00 specifications Appendix, 7-1Technical Specifications, Annex B Information

Chapter 7: Appendix

7-1 Technical Specifications

Annex B Information

The following design information is provided for your reference:

1.	No modifications are allowed to this equipment that could alter the CE compliance
2.	Ambient temperature:	0 degrees Celsius – Maximum (104 degrees Fahrenheit)
3.	Humidity range:	50% relative humidity
4.	Altitude:	Sea level
5.	Environment:	Clean, dust-free and non-explosive
6.	Radiation:	None
7.	Vibration:	Minimal, i.e. machine mounting

8.	Allowable voltage fluctuation:	+/- 10%
9.	Allowable frequency fluctuation:	Continuous	+/- 1%
		Intermittent	+/- 2%

10.	Nominal supply voltage:		460/3/60 (Verify on serial number tag)
11.	Earth ground type:	TN (system has one point directly earthed through a
	protective conductor)

12.Power supply should include a ground connection.

13.Over-current protection is supplied in the dryer, but additional protection should be supplied by the user.

14.The door-mounted disconnect serves as the electrical disconnect device.

15.Dryer is not equipped with local lighting.

16.Functional identification

17.Dryer is equipped with a CE mark

18.Cable support may be required for power cord, depending on final installation.

19.No one is required to be in the interior of the electrical enclosure during the normal operation of the unit. Only skilled electricians should be inside the enclosure for maintenance.

20.Doors can be opened with a screwdriver, but no keys are required.

21.Two-hand control is not required or provided.

22.All dryers should be moved around and set in a place with a lift truck or equivalent.

23.There are no frequent repetitive cycles that require manual control⎯repetitive functions are automatic while the dryer is operating.

24.The machine is not equipped with cable less controls.

25.Color-coded (harmonized) power cord is sufficient for proper installation.

15, 30, & 60 cfm Compact Dryers 40