14 Iss 1
Transportation
Transportation
Your scooter may be disassembled quickly
and simply for transportation.
1. Engage the drive unit by pushing the
freewheel lever forwards to stop the
scooter from moving during docking and
transportation.
2. Lift off the front basket.
3. Remove the seat, leaving the seat stem in
position.
4. Remove the batteries “A” then “B”
Transport batteries in the upright position.
5. Place the basket in the battery wells.
6. Lower the tiller, using the adjustment lever
to its lowest setting, locking in the basket
(Photo 14.1).
7. De-dock the rear drive unit by lifting the
docking handle (rear light) and moving
the front frame forwards. Note: Batteries
MUST be removed before the scooter can
be de-docked (Photo 14.2).
8. Using the lifting handles provided carefully
lift the scooter safely and securely into
the luggage compartment of the vehicle
(Photo 14.3).
TIP:
Lift the front wheels in rst and use these to
roll the frame along. Use the step at the boot
opening to rest parts if required (Photo 14.4).
To reassemble the scooter reverse the
sequence above.
Important:
When reassembling the scooter,
remember to insert the battery locking
pin, because failure to do so may result
in the batteries disengaging during use.
Always secure your scooter parts before
transportation. Do not sit on your scooter
whilst it is being transported in or on
another vehicle.
Photo 14.4
Photo 14.1
Photo 14.3
Photo 14.2