Sterling Plumbing 402028, 402027, 402024, 402025 manual Remove the Existing Toilet

Scrape off the

old wax seal

T-Bolts

Closet Flange

1. Remove the Existing Toilet

Turn off the water supply.

Flush the toilet, then sponge out all remaining water from the tank.

Disconnect the supply shut-off valve (if present), and remove the old tank and bowl.

Remove the old wax seal from the floor with a putty knife.

Replace the old T-bolts with the new 5/16″ diameter T-bolts. CAUTION: Risk of hazardous gases. If the new toilet is not installed immediately, temporarily stuff a rag in the closet flange.

Sterling 3 1035429-2-D