Sterling Plumbing 402025 manual Final Connections, Supply Shut-OffValve, Adjusting the Water Level

Fill	Compression
Valve Nut	Washer	Waterline
Supply	Tubing
Shank
Seal	Compression
Washer
	Nut
Coupling	Ferrule
Nut	Supply
	Shut-Off
	Valve
Supply Shut-Off Valve		Adjusting the Water Level
	Connection

4. Final Connections

Connect the supply shut-off valve to the toilet supply shank.

Open the supply shut-off valve slowly to check for leaks. If the connections have been properly assembled, a slight tightening of the nuts should stop leakage.

Install the toilet seat according to the packed instructions.

Carefully set the cover on the tank.

Flush the toilet several times using first one push button and then the other, and check all connections for leaks. Verify proper operation.

Periodically check for leaks for several days following the installation.

Adjustments

Adjust the water level in the tank to the marked waterline.

Rotate the threaded rod clockwise to raise the water level or counterclockwise to lower the water level as needed.

Periodically check for leaks for several days following the installation.

1035429-2-D 6 Sterling