Install the Bowl | Sterling Plumbing 402027, 402024, 402025, 402028

Wax Seal

Bolt Cap

Nut

Washer

Bolt Cap Base

T-Bolt

Closet Flange	T-Bolt

2. Install the Bowl

Install a supply shut-off valve.

Lay the toilet down onto a padded surface.

From the bottom of the toilet, ﬁrmly press a new wax seal around the toilet outlet.

Remove the temporary rag (if used) from the toilet ﬂange hole.

Align and lower the toilet over the ﬂange and T-bolts.

IMPORTANT! Risk of external leakage. Do not lift or rock the bowl after placement. If you break the watertight seal, you must install a new wax seal.

Apply your full body weight around the toilet to set the seal.

Place the bolt cap bases over the T-bolts in the ″up″ position as marked.

Place the washers and nuts on the bolt cap bases and T-bolts.

IMPORTANT! Risk of product damage. Overtightening may cause breakage or chipping of the vitreous china.

Carefully tighten the nuts.

IMPORTANT! Risk of product damage. Protect the vitreous china from the saw blade when cutting off excess T-bolt length.

Measure the length of the T-bolts from the top of the nuts. If the bolts extend 1/4″ (6 mm) or more, cut off the excess.

Attach the bolt caps.

1035429-2-D

Sterling