Sterling Plumbing 71110116 Technical Information, Installation Notes, Product Diagram, Ensembletm

ENSEMBLETM

Technical Information

Fixture:*	basin area		top area
Bathing	40″ (101.6 cm) x		52″ (132.1 cm) x
well	27″ (68.6 cm)		35″ (88.9 cm)
	water depth		capacity
To overflow	16″ (40.6 cm)		45 gal (170.3 L)
* Approximate measurements for comparison only.
Model		Door maximum	Door maximum
		width	height
71110116		58″ (147.3 cm)	55-1/2″ (141 cm)
71110118
71110126
71110128
71110316
71110326

Installation Notes

Install this product according to the installation guide.

Size the drain cutout to fit the drain assembly that will be used.

End stud positioning is critical if nailing-in flanges are to be used.

Double studding is recommended for pivot shower door installations.

Studs should be positioned roughly as shown for support clip or roofing nail installation.

Attach grab bars at the specified backer board locations only.

	14"	30" (76.2 cm)	16"		Recommended Support Clip or Roofing Nail
			(40.6 cm)		Location (5 Total)
6" (15.2 cm)	(35.6 cm) 14"
					1-1/4"			43-1/2" (110.5 cm)
(Typical)		(35.6 cm)	11-1/2" (29.2 cm)
					(3.2 cm)				42" (106.7 cm)
				4"
					53"
		20-1/4"		(10.2 cm)
				27-1/2"	(134.6 cm)
		(51.4 cm)
43-1/2"				(69.9 cm)
		Drain Cutout
(110.5 cm)				8"
	2" (5.1 cm) D. Drain
				(20.3 cm)
	3-1/2"
				73-1/4"
	(8.9 cm)			(186.1 cm) 3"					20"
		8-3/4" (22.2 cm)			(7.6 cm)
									(50.8 cm)
	60" (152.4 cm) Min
	60-1/8" (152.7 cm) Max					16"			19"
				End Wall		(40.6 cm)
Back Wall					60"				(48.3 cm)
		24"			(152.4 cm)		1-1/2" (3.8 cm)
		(61 cm)
		Grab Bar			18" (30.5 cm) or 24" (61 cm)
					Grab Bar
		10" (25.4 cm)			24" (61 cm) Grab Bar				3-1/8" (7.9 cm)
		10" (25.4 cm)							Overflow Detail
		1" (2.5 cm)						Note: Right and left end walls
4" (10.2 cm)				1" (2.5 cm) 3-1/2" (8.9 cm)				are the same, only mirrored.
	3-1/2" (8.9 cm)								Backer board locations

Product Diagram

ENSEMBLETM 42″ (106.7 cm) OVAL BATH/SHOWER SYSTEM WITH BACKER BOARDS Page 2 of 2

1065809-4-A