Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask Screen Care and Cleaning, Velux covering

SCREEN CARE AND CLEANING

With reasonable care, you can expect many years of trouble-free use of your Stewart projection screen.

We encourage you to keep your screen clean. To protect your screen when it is not in use, store it in the fully retracted position.

Avoid getting any foreign material on the screen, as cleaning may prove very difficult. It may not be possible to remove scratches, paint, ink, etc.

General maintenance

The surface of your screen is delicate. Special attention to these instructions should be followed when cleaning.

‹A draftsman-style brush may be used to lightly whisk away any loose dirt or dust particles. (This type of brush is usually available at office supply stores.) Stewart Filmscreen has an optional screen cleaning kit that contains the proper type of brush. Contact your dealer if you would like to obtain this cleaning kit.

‹Particles left on the screen when it is retracted into the case may form an impression on the screen surface. Periodically wipe the back of the screen with a clean damp cloth.

‹For tougher spots, use a solution of mild detergent and water. Rub lightly using a sponge. Blot with a damp sponge to absorb excess water. Residual water marks will evaporate within a few minutes. Let the screen air dry completely before retracting.

Do not use any other cleaning materials on the screen. Contact the factory if you have questions about removing difficult spots.

Velux covering

‹Use a lint roller to remove particles from the Velux material.

‹A brush can be used to comb (lift) the nap of the Velux material to help eliminate depression marks.

Caution

Do not use chemicals or liquid to clean the fabric.

Replacement parts and service

No user-serviceable parts are contained within the unit. Contact your dealer or the factory if you require part replacement or service.

4-Way ScreenWall ElectriMask: Owner’s Manual 19