Unpacking and unrolling the screen
The viewing side of the projection screen is rolled to the inside to protect the optical coating. The screen is rolled lengthwise.
1.Remove the screen from the cardboard shipping tube.
2.On a clean floor, unroll screen viewing side up.
3.Allow the paper to unroll between screen back and the floor. (This will keep the screen clean.) See Figure 5.
Caution
Be careful not to touch or scratch the image surface with fingernails.
Do not use any tools to fasten the screen to the frame.
Do not fold or crease the screen.
Figure 5: Unrolling the screen
7 |
