ENGLISH

GB

 

 

ADJUSTMENT OF THE CLUTCH WIRE

If the drive cannot be engaged or disengaged, it may be that the clutch wire needs adjusting.

Adjust as follows:

1.Remove the transmission cover by unscrewing the screws S (fig. 9).

2.When the clutch loop is released it should be possible to pull the mower backwards without any resistance. If this is not the case, loosen the locking nut U and screw in the nipple T until the mower can be moved backwards (fig. 15).

3. When the clutch loop is pressed in approx. 2 cm (posi- tion 1) there should be some resistance when moving the mower backwards. With the clutch loop fully pressed in (position 2) it should not be possible to pull the mower backwards. Loosen the lock- ing nut U and screw out the nipple T until this position is achieved.

4. Finally tighten the locking nut U.

CHANGING BLADES

Use protective gloves to prevent cuts when changing blades/knifeblades.

Blunt and damaged blades tear off the grass and spoil the look of the lawn after mowing.New, well sharpened blades cut the grass cleanly, so that the lawn looks green and fresh even after mowing.

Always check the blade after an impact. First dis- connect the ignition cable. If the blade system has been damaged the defective parts must be changed. Always use genuine spare parts.

To replace the blade, slacken the screw (fig. 16). Fit the new blade so that the stamped STIGA log- otype is turned facing the blade attachment (and not facing the grass). Refit the washer and screw. Tighten the screw fully to a torque of 40 Nm.

When replacing the blade, the blade screw should also be replaced.

The guarantee does not cover damage to the blade, blade holder or engine caused by running into ob- stacles.

When replacing the blade, the blade holder and blade screw, always use original spare parts. Non- authentic spare parts could lead to the risk of per- sonal injury or damage, even if they fit the machine.

SHARPENING OF THE BLADES

Sharpening of the blades must be done by wet method grinding, using a whetstone or a grind- stone.

For the sake of safety, the blades should not be sharpened on an emery wheel. A very high temper- ature could cause the blade to become brittle.

Once the blade has been sharpened, it must then be balanced so as to avoid vi- bration damage.

STORAGE

WINTER STORAGE

Empty the fuel tank. Start the engine and let it run until it stops. The same petrol must not remain in the tank for more than one month.

Tip up the mower and screw out the sparking plug. Pour a teaspoon of engine oil in the sparking plug hole. Pull out the starting handle slowly so that the oil is distributed in the cylinder. Screw in the sparking plug.

Thoroughly clean the mower and store it indoors in a dry place.

Page 7 Page 8
Page 8
Image 8
Stiga 8211-0225-06 manual Adjustment of the Clutch Wire, Changing Blades, Sharpening of the Blades, Winter Storage
Page 7 Page 8

8211-0225-06 specifications

The Stiga 8211-0225-06 is a remarkable outdoor lawn mower that combines efficiency, innovation, and user-friendly features, making it an excellent choice for homeowners and gardening enthusiasts alike. Designed with advanced technology and thoughtful engineering, this mower delivers unparalleled performance and convenience.

One of the standout features of the Stiga 8211-0225-06 is its powerful electric motor, which ensures a quiet yet robust operation, allowing users to mow their lawns without the noise pollution often associated with gasoline-powered mowers. This electric motor is complemented by a high-capacity battery, providing impressive run times on a single charge. The mower can handle large areas without needing frequent recharges, making it perfect for maintaining spacious gardens.

The cutting system of the Stiga 8211-0225-06 is designed for precision and versatility. It features multiple cutting heights, adjustable to cater to different grass lengths and types. This flexibility allows users to achieve the perfect lawn finish tailored to their preferences. Additionally, the wide cutting deck enhances efficiency, enabling faster mowing and reducing the time spent on lawn maintenance.

Ergonomics play a crucial role in the design of the Stiga 8211-0225-06. Equipped with a comfortable handle, the mower ensures ease of use even during extended mowing sessions. The lightweight construction further contributes to its maneuverability, allowing users to navigate around tight corners and obstacles with minimal effort.

Another impressive aspect of the Stiga 8211-0225-06 is its eco-friendly approach. By utilizing electric power instead of fossil fuels, this mower produces zero emissions during operation, making it a greener choice for environmentally conscious users. The absence of a combustion engine also means reduced maintenance needs, saving users time and money on upkeep.

Safety features are also a priority in the Stiga 8211-0225-06 design. It incorporates a reliable blade brake system that stops the blades almost immediately when the user releases the handle, ensuring safety during operation.

In summary, the Stiga 8211-0225-06 stands out as a premier choice for anyone looking to maintain their lawn effectively. Its powerful electric motor, adjustable cutting heights, ergonomic design, eco-friendly operation, and safety features make it an ideal lawn care companion for homeowners seeking both performance and convenience.
Top Page Image Contents