Do not attempt to operate the freezer until the safety precautions and operating instructions in this manual are read completely and are thoroughly understood.
Take notice of all warning labels on the freezer. The labels have been put there to help maintain a safe working environment. The labels have been designed to withstand washing and cleaning. All labels must remain legible for the life of the freezer. Labels should be checked periodically to be sure they can be recognized as warning labels.
If danger, warning or caution labels are needed, indicate the part number, type of label, location of label, and quantity required along with your address and mail to:
STOELTING, INC.ATTENTION: Customer Service502 Hwy. 67Kiel, Wisconsin 53042The freezer has been assembled, operated and inspected at the factory. Upon arrival at the final destina- tion, the complete freezer must be checked for any damage which may have occurred during transit.
With the method of packaging used, the freezer should arrive in excellent condition. THE CARRIER IS RE-
SPONSIBLE FOR ALL DAMAGE IN TRANSIT, WHETHER VISIBLE OR CONCEALED. Do not pay the freight bill until the freezer has been checked for dam- age. Have the carrier note any visible damage on the freight bill. If concealed damage and/or shortage is found later, advise the carrier within 10 days and request inspection. The customer must place claim for damages and/or shortages in shipment with the carrier. Stoelting,
Inc. cannot make any claims against the carrier.2.3FREEZERINSTALLATIONInstallation of the freezer involves moving the freezer close to its permanent location, removing all crating, setting in place, assembling parts, and cleaning.
A. Uncrate the freezer.
B. The freezer must be placed in a solid level position. To level adjust casters. Figure 3.
C.The freezer is equipped with an air cooled condenser and requires correct ventilation; the front is the intake and the back is the discharge. Both front and back require 3" clearance for proper operation.
D.Place all switches in the OFF position.
E.Connect the two power cords. The plug is designed for 208/230 volt/20 amp duty. The unit must be connected to a properly grounded receptacle. The electrical cord furnished as part of the freezer has a three prong grounding type plug. The use of an extension cord is not recommended. If one must be used, use one with a size 12 gauge or heavier with a ground wire. Do not use an adaptor to get around grounding requirements.
CAUTIONDO NOT ALTER OR DEFORM PLUG IN ANY WAY!F.Install the drip tray, cover and other miscellaneous parts on the freezer.
3