4 | Introduction |
Front Panel
(Figure 3)
Push Here to
Eject Carrier
Drive Ready/
CarrierError LED
Handle 
Drive Activity
LED
Key | Fan Error LED |
Lock | Disable Switch |
Power
Switch
Figure 3: Front Panel
•Key Lock - This lock prevents unauthorized removal or installation of the carrier.
•Carrier Handle - This handle allows the ejection and installation of the drive carrier.
To eject the carrier, simply push on carrier handle. Once handle pivots outward, pull han- dle to remove carrier.
To install the carrier, simply insert the drive carrier into the receiving frame. Push handle in to fully seat carrier into the receiving frame.
•Power Switch - This switch allows the drive carrier to be powered OFF/ON at anytime.
NOTE: Grey power switch indicates SATA 3Gbps DX115 receiving frame. Blue power switch indicates SAS DX115 receiving frame.
If the drive is already installed in the receiving frame before a system power up, you do not have to press and hold the switch to power on the drive. During system power up, the drive will automatically
CAUTION: It is the responsibility of the user to ensure that the host does not access the drive while attempting to remove the drive. Failure to do so may result in loss of data and/or damage to the drive itself!
StorCase Technology, Inc. | DX115 for Backup User's Guide - Rev. A01 |
