USER INSTRUCTIONS
Small Clarendon
6.1
Place the flame baffle onto the burner and push up against the rear tray lip, see diagram 4.
4
AR0359
6.2Locate the rear panel against the spacer brackets and slide down so that it locates on the ledge of the flame baffle, see diagram 5.
5
AR0360
6.3Locate the front coal between the heat shield and flame baffle so that its ends sit flat against the burner skin, see diagram 6.
6
6.4Place five of the loose round coals on the front coal so that they lean against the flame baffle, in between the fingers. Place the two rectangular coals behind the round coals, one at each side, see diagram 7.
7
AR0362
6.5Place four of the loose round coals behind the first row so that they sit on the fingers, the two outer coals should touch the rectangular coals, see diagram 8.
8
AR0363
6.6Place the remaining three round coals behind the centre row so that they touch the back panel, see diagram 9.
9
AR0361
AR0364
6
