USER INSTRUCTIONS
COAL LAYOUT
NOTE: THERE ARE TWO LARGE COALS IN A BAG INSIDE THE MAIN BAG. THESE ARE ONLY TO BE USED WHEN A CURVED FRONT SUCH AS THE HOLYROOD AND RICHMOND ARE USED. DO NOT USE THE TWO LARGE COALS WHEN USING A FLAT FRONTED FRAME.
A) FRONT ROW COAL LAYOUT USING FLAT FIRE FRONTS
7.6The front row is the only difference in coal layout. Place one large coal centrally on the front coal resting against
the frame. Then place three small coals either side. See diagram 8.
8
B)FRONT ROW COAL LAYOUT USING CURVED FIRE FRONTS.
7.7Place three large coals resting on top of the front coal and against the front of the frame, then place two small coals either side of the large ones. See diagram 9
9
C)COAL LAYOUT CONTINUED FROM FRONT ROW
7.7Place four large coals behind the first row and one small coal either end resting up against the side panels.
See diagram 10
10
7.8Place one small coal either side on top of the flame baffle in each rear corner. Then place two large coals in between the two small coals. These coals should touch the rear panel.
See diagram 11.
11
7.9Finally place five large coals between the second and rear row of coals. See diagram 12.
12
7.10It is essential that gaps are left between the coals to maximise the performance of the appliance.
6
