SITE REQUIREMENTS

1.FLUE OR CHIMNEY

1.1The flue or chimney system must be in good condition.

It must be inspected by a competent person and passed for use with the appliance before installation

Products of combustion entering the room can cause serious health risks.

1.2You must check the following:

The construction of the masonry chimneys, flue block chimneys and connecting flue pipe system must meet the requirements of the Building Regulations†

A flexible flue liner system can be used if certified for use with solid fuel systems and installation complies with manufacturer’s instructions and Building Regulations.

The flue liner must be replaced when an appliance is replaced unless proven to be recently installed and in good condition.

If it is necessary to fit a register plate it must conform to the Building Regulations†

The minimum height of the flue or chimney must

be 4.5m from the hearth to the top of the flue, with no horizontal sections, a maximum of 4 bends with angles of less than 45 degrees

Enure the connecting flue pipe is kept a suitable distance from any combustible material and does not form part of the supporting structure of the building

Make provision to remove the appliance without the need to dismantle the chimney

Any existing flue must be confirmed as suitable for the new intended use as defined in the Building Regulations

The flue or chimney systems must be inspected and swept to confirm the system is structurally sound and free from obstructions**

If the appliance is believe to have previously served an open fire the chimney must be swept a second time within a month of regular use after installation to clear any soots falls that may occurred due to difference in combustion levels.

The flue exit from the building must comply with local building control rules.†

Do not connect or share the flue or chimney system with another heating appliance

1.3Do not connect to systems containing large voids or over 230mm square.

1.4You must provide suitable access to enable the collection and removal of debris.

1.5You must sweep and inspect the flue when the appliance is installed.

1.6You must check the flue draught with all windows and doors closed and any extraction fans in this or adjoining rooms running at maximum speed. (See next section for additional ventilation requirements)

Max. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg

In the U.K:

*BS 6461: Part 1, and the requirements of Building Regulations

**This should be done by a NACS registered (UK only)/ INFO registered (Eire only) chimney sweep, who will issue you with a certificate.

† Building Regulations Document J

Flue Plate:

Where a hearth, fireplace, flue or chimney is provided or extended (including cases where a flue is provided as part of refurbishment work), information essential to the correct appliance and use of these should be permanently posted in the building, to meet Requirement J4 of the Building Regulations (England and Wales), F3.12 (Scotland).

† Building Regulations Document J

Additional:

A new factory made system that complies to EN 1856; Part 1 can be used providing installation is to the requirements of:

i)BS 7566 Parts 1 -4

ii)the manufacturer's instructions

iii)Building Regulations.

For a guide containing information on Chimneys and Flues contact:

The British Flue & Chimney Manufacturers’ Association,

FETA

2 Waltham Court Milley Lane Hare Hatch Reading Berkshire RG10 9TH

Tel: 0118 9403416

e-mail: info@feta.co.uk

14

Page 14
Image 14
Stovax PM219 manual Site Requirements, Flue or Chimney, Max. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K, Flue Plate

PM219 specifications

The Stovax PM219 is a remarkable multifuel stove designed to deliver both warmth and aesthetic appeal to any home. This contemporary stove combines sophisticated engineering with advanced technology to ensure optimal performance and efficiency. With its sleek design and robust build, the PM219 seamlessly fits into any room, becoming a focal point while emitting a comforting glow.

One of the main features of the Stovax PM219 is its high-efficiency combustion system. This innovative technology ensures that the stove can use both seasoned wood and smokeless fuels effectively, providing homeowners with flexibility in fuel choice. The dual-fuel capability allows the PM219 to operate efficiently regardless of the environmental conditions, making it an excellent option for varying climates.

The stove is equipped with a powerful airwash system that keeps the glass door clean and clear. This system works by directing a flow of pre-heated air across the glass, preventing soot build-up and ensuring that the view of the flames remains unobstructed. This feature not only enhances the visual experience of the fire but also reduces maintenance costs for the homeowner.

Additionally, the Stovax PM219 boasts a nominal heat output of approximately 5 kW, making it suitable for small to medium-sized rooms. Its compact size does not compromise its heating ability, as it is designed to provide effective warmth while maintaining a high level of efficiency with a low emissions output. This characteristic not only benefits the environment but also ensures compliance with current EcoDesign standards.

Another striking feature of the PM219 is its stylish and modern aesthetic. It is available in various finishes, including classic black and contemporary steel, allowing it to complement a diverse range of interior designs. The clean lines and minimalistic approach of the stove make it visually appealing and versatile for modern living spaces.

In conclusion, the Stovax PM219 is an exemplary multifuel stove that combines contemporary design with practical features. Its efficient combustion system, effective airwash technology, and aesthetic appeal make it a top choice for homeowners looking for an environmentally friendly heating solution. By investing in the PM219, consumers can enjoy a blend of style, efficiency, and comfort in their home heating experience.