INSTALLATION INSTRUCTIONS
INSTALLATION
4.2Locate the front coal moulding in front of the flame baffle ensuring that the end legs sit flat against the burner skin, see diagram 11.
11
AR0366
4.3Place three large coals on the front coal so that they lean against the flame baffle, and the four large coals on the flame baffle so that they sit on the fingers, see diagram 12.
12
AR0367
4.4Place two small coals at each end of the front coal so that they lean against the flame baffle, and a further two large coals on the flame baffle, one at each end, see diagram 13.
13
14
AR0369
4.6Ensure that the rope seal on the back of the glass frame is intact. Replace the glass frame ensuring that the 6 screws are tightened evenly. DO NOT OVERTIGHTEN. see diagram 15.
15
AR0887
NEVER OPERATE THE STOVE WHEN THE DOOR IS REMOVED OR WHEN THE GLASS IS BROKEN.
4.7Secure the glass frame assembly using the 6 screws provided, tighten evenly and do not overtighten. See diagram 15.
4.8Hang the dcorative steel trim onto the glass frame as shown. See diagram 17
17
AR0368
4.5Place five small coals along the rear of the flame baffle, resting against the rear ledge, see diagram 14.
5. LIGHTING
5.1Full instructions are given in Section 2.
13