USER INSTRUCTIONS
Steel Manhattan
6.1Place the flame baffle onto the shelf at the rear of the tray and push up against the rear ledge, see diagram 5.
5
AR0365
6.2Locate the front coal moulding in front of the flame baffle ensuring that the end legs sit flat against the burner skin, see diagram 6.
6
AR0366
6.3Place three large coals on the front coal so that they lean against the flame baffle, and the four large coals on the flame baffle so that they sit on the fingers, see diagram 7.
7
AR0367
6.4Place two small coals at each end of the front coal so that they lean against the flame baffle, and a further two large coals on the flame baffle, one at each end, see diagram 8.
8
AR0368
6.5Place five small coals along the rear of the flame baffle, resting against the rear ledge, see diagram 9.
9
AR0369
6.6Ensure that the rope seal on the back of the glass frame is intact. Replace the glass frame ensuring that the 6 screws are tightened evenly. DO NOT OVERTIGHTEN. see diagram 10.
10
AR0887
NEVER OPERATE THE STOVE WHEN THE DOOR IS REMOVED OR WHEN THE GLASS IS BROKEN.
6
