USER INSTRUCTIONS

1.GENERAL

1.1Installation and servicing must be carried out by a competent person.

1.2In all correspondence, please quote the appliance type and serial number which can be found on the data badge located at the rear of the stove.

1.3Ensure curtains are not positioned above the stove, and that there is at least a clearance of 300mm between the sides of the stove and any curtains.

1.4If any cracks are observed in the glass panel, do not use appliance until the glass has been replaced.

1.5If, for any reason, the flue has to removed from the stove, the seals must be replaced in the inner telescopic section and the inner spigot.

1.6Do not obstruct the flue terminal in any way i.e. by planting flowers, trees, shrubs etc in the near vicinity, or by leaning objects up against the terminal guard.

1.7Do not use a garden sprinkler so as to allow excessive amounts of water into the flue terminal.

1.8Do not stand or place objects on the terminal guard as this will deform.

1.9This product is guaranteed for 2 years from the date of installation, as set out in the terms and conditions of sale between Gazco and your local Gazco dealer. Please consult with your local Gazco dealer if you have any questions. In all correspondence always quote the Model No. and Serial No.

1.10The manufacturer considers the full outer casing of this stove to be a working surface. It will become hot whilst in operation. A suitable guard is recommended to protect young children, the aged and infirm.

Please ensure the commissioning checklist is completed by your installer, as this is a requirement of your Guarantee.

2.LIGHTING THE STOVE

2.1Locate the control valve on the appliance. There are two control knobs on the valve, the right hand knob controls the pilot ignition and the left hand knob controls the main burner.

2.2If your appliance has already been upgraded to battery remote control, please refer to the instructions provided with the upgrade to operate the remote control. The following instructions will work for either situation.

1

AR0914

2.3Ensure that the left-hand control knob is pointing to off ().

2.4Ensure that the right hand control knob is pointing to off ().

2.5Press in the right hand control knob and rotate it anticlockwise until a click is heard (keep pressing in) and the knob is pointing to pilot ( ). The pilot should now light. If the pilot has not lit, repeat the procedure until it does.

2.6Keep the control knob pressed in for 10 seconds and then release it, the pilot should stay alight. If the pilot goes out, repeat the procedure until does.

2.7If the pilot will not light after repeated attempts, contact the retailer or installer from whom the appliance was purchased.

2.8Turn the right hand control to point to main burner ( ) . The appliance can now be controlled using the left hand control knob.

2.9Turn the left hand control knob to point to low fire ( ) the main burner will light on low. The burner can now be controlled between low and high settings. Turn the control knob anti-clockwise to increase the flame height and clockwise to decrease the flame height.

THE YELLOW FLAMES WILL APPEAR WHEN THE FIRE HAS GAINED SUFFICIENT HEAT - TYPICALLY 10 TO 20 MINUTES.

IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT IN USE, WAIT 3 MINUTES BEFORE ATTEMPTING TO RELIGHT THE APPLIANCE.

3.TURNING OFF THE STOVE

3.1To turn the stove off, locate the control valve, turn the left- hand control knob until it points to off (). The main burner will go out leaving the pilot burning.

3.2To turn the pilot off, locate the control valve, turn the right- hand control knob until it points to off (), the pilot will go out.

4.UPGRADING YOUR STOVE

4.1Your stove is fitted with a control valve that can be easily upgraded to battery powered remote control. This upgrade can be fitted by anyone capable of simple DIY jobs and requires no special training. There are two versions of this control which can be obtained through your local Gazco stockist.

4.2STANDARD REMOTE CONTROL This remote control can control the gas appliance after the pilot has been lit. It can turn the main burner on and regulate it from low through to high and back again. It can turn the main burner off leaving the pilot burning. GAZCO PART NUMBER 8455.

4.3THERMOSTATIC AND TIMER REMOTE CONTROL This remote control can control the gas appliance after the pilot has been lit. In ‘MANUAL MODE’ it can be used to turn the main burner on and manually regulate it from low through to high and back again. It can also be used to turn the main burner off leaving the pilot burning. In ‘AUTO MODE’ it will automatically regulate the room temperature. In ‘TIMER MODE’ it will turn the fire on and off according to a pre-set programme and automatically regulate the room temperature during two on periods. GAZCO PART NUMBER 8456.

4

Page 4
Image 4
Stovax Stockton Log Effect Stove Range manual User Instructions, General, Lighting the Stove, Turning OFF the Stove

Stockton Log Effect Stove Range specifications

The Stovax Stockton Log Effect Stove Range is a celebrated collection that brings the warmth and ambiance of a traditional log fire into modern homes. Known for its innovative design and high efficiency, this range offers a perfect blend of style and practicality, making it a popular choice among homeowners and interior designers alike.

One of the standout features of the Stockton Log Effect Stove Range is its realistic log effect fuel bed, which creates an inviting and cozy atmosphere. This clever design simulates the look of real logs burning, providing a comforting focal point within any room. The stove is available in various sizes, ensuring that there's a model to fit any space, whether large or small.

The efficacy of the Stockton stoves is further enhanced by advanced technology that promotes efficient heat output. Many models within the range come equipped with a multi-fuel capability, allowing users to choose between burning logs, smokeless fuel, or even coal, depending on availability and preference. This versatility not only maximizes the stove's usability but also reduces reliance on one type of fuel, catering to different heating needs throughout the year.

Another attractive characteristic of the Stovax Stockton Log Effect Stove is its high efficiency rating, which ensures that more heat is extracted from the fuel while minimizing emissions. The inclusion of a clean burn technology helps to burn off gases and particles before they enter the flue, leading to a cleaner, more environmentally friendly burn. This feature not only benefits the environment but also contributes to a more efficient heating source that saves energy costs.

The aesthetic appeal of the Stockton range is further enhanced by its sleek and contemporary design. Available in a variety of finishes and colors, including traditional black and modern gray, these stoves can seamlessly blend into both traditional and contemporary interiors.

Safety is also a priority within the design of these stoves. Many models feature built-in safety measures such as a secure door mechanism and effective air controls, ensuring that users can operate the stove easily and safely.

In conclusion, the Stovax Stockton Log Effect Stove Range combines traditional design elements with modern technology and versatility. It stands out for its realistic log effect, efficiency, and safety features, making it an ideal choice for anyone looking to enhance their living space with both warmth and style.