STOW MS-63 PLASTER/MORTAR MIXER — GENERAL INFORMATION

Application

The STOW MS-63 series mixers (drum capacity of 7.0 cu. ft./198 liters) are shipped completely assembled and have been factory tested and are ready for use.

This mixer is only intended for the production of plaster and mortar. The mixer must be used for its intended purpose and is not suitable for the mixing of flammable or explosive substances. The mixer must not be used in an explosive atmosphere.This mixer has a batch capacity between 2-1/2 and 3-1/2 bags.

Power Plants

The STOW plaster and mortar mixer can be powered by either a Honda GX240K1HA2 or GX160K1QMX2HX2 air- cooled, 4-stroke gasoline engine or a 1.5 HP electric motor. Refer to Table 2 for specific engine or electric motor data information.

Electrical

If mixer is equipped with an electric motor, make sure that the power being supplied to the motor corresponds to the voltage rating label on the motor.Supplying the wrong voltage to the electric motor will cause severe electrical damage to the motor.

Always make sure the OFF/ON switch on the electric motor is in the OFF position before applying power.

It is strongly recommended when inserting the mixer's power cord into a receptacle, that a G.F.C.I. (Ground Fault Current Interrupter) receptacle be used (115 VAC

applications).

Extension Cables

The extension cable should be a 3-wire configuration that includes a ground wire that conforms to UL code. The wire cross section must be a minimum of 2.5 mm2. Choose an extension cord of adequate current carrying capacity as ref- erenced in Table 6. Remember cable distance affects the current-voltage capacity of the extension cable.

Ensure that the extension cable is carefully laid out avoid- ing wet areas, sharp edges and locations where vehicles might run over it. Avoid allowing the extension cable to be trapped underneath the mixer.

Unroll the extension cable fully or it will overheat and could catch fire. Make sure that all extension cable connections are dry and safe. Replace any defective or badly worn ex- tension cable immediately.

Hardware

Check all hardware on the mixer before starting. Periodically inspect all hardware. Loose hardware can contribute to early component failure and poor performance. Use Table 4 as general guideline when torqueing of mixer hardware is required. Remember to keep all mixer hardware components tight.

Table 4. Hardware Torque

Recommendations

Hardware

Torque (ft-lbs)

Diameter

 

 

 

5/16-inch x 18

14

 

 

3/8-inch x 16

24

 

 

3/8-inch x 24

37

 

 

1/2-inch x 13

39

 

 

1/2-inch x 13

90

(Grade 8)

 

 

 

Engine Maintenance

For basic engine maintenance, refer to the engine maintenance section in this manual. For a more detailed engine maintenance, refer to the Honda Engine Owner's manual furnished with the engine.

STOW MS-63 MIXER — OPERATION AND PARTS MANUAL — REV. #5 (03/26/10) — PAGE 15

Page 15
Image 15
Stow manual Stow MS-63 PLASTER/MORTAR Mixer General Information, Engine Maintenance

MS-63 specifications

The Stow MS-63 is a robust and versatile machine designed for a range of modern engineering and manufacturing applications. This multi-functional machine seamlessly combines precision with power, making it a valuable addition to any workshop or production line.

One of the standout features of the Stow MS-63 is its advanced control system, which allows for unparalleled ease of use and adaptability. The machine is equipped with a state-of-the-art digital interface that provides real-time monitoring and management of operations. This feature ensures that operators can easily adjust settings to accommodate various tasks without extensive technical knowledge. Users can also program complex sequences, which increases efficiency and reduces the likelihood of errors.

The MS-63 boasts a heavy-duty construction, with high-quality materials that ensure durability and longevity. The frame supports rigorous use, and its design minimizes vibrations during operation, resulting in smoother processes and enhanced precision. Additionally, the machine is engineered with safety in mind, incorporating multiple safeguards to protect operators during use.

In terms of technology, the Stow MS-63 is equipped with cutting-edge automation capabilities. It can integrate with a variety of sensors and robotics, facilitating automated workflows. This level of automation not only speeds up production but also allows for real-time data collection and analysis, helping businesses optimize their processes and improve output quality.

The Stow MS-63 is designed to handle various materials, making it suitable for diverse industrial applications, from metalworking to wood processing. Its versatility is enhanced by a selection of attachments and tools, which can be easily swapped out depending on the task at hand. This adaptability means users can efficiently tackle different projects without needing multiple machines, ultimately saving space and costs.

Moreover, the MS-63's energy-efficient design reflects a commitment to sustainability. By minimizing power consumption without sacrificing performance, this machine aligns with modern industry goals of reducing environmental impact while maintaining high productivity levels.

In conclusion, the Stow MS-63 stands out for its combination of advanced technology, robust design, and versatile capabilities. It represents a significant investment for operators seeking to enhance their manufacturing processes and achieve optimal efficiency in a competitive environment. With its integration of smart technology and commitment to safety and sustainability, the MS-63 is poised to be a leader in industrial machinery for years to come.