STOW MS-63 PLASTER/MORTAR MIXER — BASIC ENGINE COMPONENTS

Figure 6. Engine Controls and Components

INITIAL SERVICING

The engine (Figure 6) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing.

5.

FuelValve Lever – OPEN to let fuel flow, CLOSE to stop

 

the flow of fuel.

6.

Choke Lever – Used in the starting of a cold engine, or in

 

cold weather conditions. The choke enriches the fuel

 

mixture.

1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

DANGER Explosive

Fuel Hazard

Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill, DO NOT attempt to start the engine until the fuel residue

has been completely wiped up, and the area surrounding the engine is dry.

2. Throttle Lever – Used to adjust engine RPM speed (lever advanced forward SLOW, lever back toward operator FAST).

3.

Engine ON/OFF Switch – ON position permits engine

 

starting, OFF position stops engine operations.

4.

Recoil Starter (pull rope) – Manual-starting method. Pull

 

the starter grip until resistance is felt, then pull briskly and

 

smoothly.

7. Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element.

Operating the engine without an air

filter, with a damaged air filter, or a filter

NOTE in need of replacement will allow dirt to enter the engine, causing rapid engine wear.

 

WARNING

Burn Hazard

 

 

 

Enginecomponentscangenerateextremeheat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER operate the engine with the muffler removed.

8. Spark Plug – Provides spark to the ignition system. Set spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch) Clean spark plug once a week.

9. Muffler – Used to reduce noise and emissions.

10. Fuel Tank – Holds unleaded gasoline. For additional information refer to engine owner's manual.

STOW MS-63 MIXER — OPERATION AND PARTS MANUAL — REV. #5 (03/26/10) — PAGE 17

Page 17
Image 17
Stow manual Stow MS-63 PLASTER/MORTAR Mixer Basic Engine Components, Fuel Hazard, Burn Hazard

MS-63 specifications

The Stow MS-63 is a robust and versatile machine designed for a range of modern engineering and manufacturing applications. This multi-functional machine seamlessly combines precision with power, making it a valuable addition to any workshop or production line.

One of the standout features of the Stow MS-63 is its advanced control system, which allows for unparalleled ease of use and adaptability. The machine is equipped with a state-of-the-art digital interface that provides real-time monitoring and management of operations. This feature ensures that operators can easily adjust settings to accommodate various tasks without extensive technical knowledge. Users can also program complex sequences, which increases efficiency and reduces the likelihood of errors.

The MS-63 boasts a heavy-duty construction, with high-quality materials that ensure durability and longevity. The frame supports rigorous use, and its design minimizes vibrations during operation, resulting in smoother processes and enhanced precision. Additionally, the machine is engineered with safety in mind, incorporating multiple safeguards to protect operators during use.

In terms of technology, the Stow MS-63 is equipped with cutting-edge automation capabilities. It can integrate with a variety of sensors and robotics, facilitating automated workflows. This level of automation not only speeds up production but also allows for real-time data collection and analysis, helping businesses optimize their processes and improve output quality.

The Stow MS-63 is designed to handle various materials, making it suitable for diverse industrial applications, from metalworking to wood processing. Its versatility is enhanced by a selection of attachments and tools, which can be easily swapped out depending on the task at hand. This adaptability means users can efficiently tackle different projects without needing multiple machines, ultimately saving space and costs.

Moreover, the MS-63's energy-efficient design reflects a commitment to sustainability. By minimizing power consumption without sacrificing performance, this machine aligns with modern industry goals of reducing environmental impact while maintaining high productivity levels.

In conclusion, the Stow MS-63 stands out for its combination of advanced technology, robust design, and versatile capabilities. It represents a significant investment for operators seeking to enhance their manufacturing processes and achieve optimal efficiency in a competitive environment. With its integration of smart technology and commitment to safety and sustainability, the MS-63 is poised to be a leader in industrial machinery for years to come.