STOW MS-63 PLASTER/MORTAR MIXER — MAINTENANCE (ENGINE)

Maintenance

Perform the scheduled maintenance procedures as defined by Table 8 and below:

DAILY

■Thoroughly remove dirt and oil from the engine and control area.Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the gearbox for oil leaks. Repair or replace as needed.

WEEKLY

■Remove the fuel filter cap and clean the inside of the fuel tank.

■Remove or clean the filter at the bottom of the tank.

■Remove and clean the spark plug (Figure 23), then adjust the spark gap to 0.024 ~0.028 inch (0.6~0.7 mm).This unit has electronic ignition, which requires no adjustments.

Figure 23. Spark Plug Gap

ENGINE OIL

1.Drain the engine oil when the oil is warm as shown in Figure 24.

2.Remove the oil drain bolt and sealing washer and allow the oil to drain into a suitable container.

3.Replace engine oil with recommended type oil as listed in Table 7. For engine oil capacity, see Table 2 (engine specifications). DO NOT overfill.

4.Install drain bolt with sealing washer and tighten se- curely.

ENGINE AIRCLEANER

1.Remove the air cleaner cover and foam filter element as shown in Figure 25.

2.Tap the paper filter element (Figure 25) several times on a hard surface to remove dirt, or blow compressed air [not exceeding 30 psi (207 kPa, 2.1 kgf/cm2)] through the filter elementfromtheaircleanercaseside.NEVER brushoffdirt. Brushingwillforcedirtintothefibers.Replacethepaperfilter element if it is excessively dirty.

3.Clean foam element in warm, soapy water or nonflammable solvent. Rinse and dry thoroughly. Dip the element in clean engineoilandcompletelysqueezeouttheexcessoilfromthe element before installing.

DANGER Explosive

Hazard

DO NOT use gasoline as a cleaning solvent, because that would create a risk of fire or explosion.

Figure 25. Engine Air Cleaner

Figure 24. Engine Oil (Draining)

STOW MS-63 MIXER — OPERATION AND PARTS MANUAL — REV. #5 (03/26/10) — PAGE 27

Page 26 Page 28
Page 27
Image 27
Stow manual Stow MS-63 PLASTER/MORTAR Mixer Maintenance Engine, Hazard
Page 26 Page 28

MS-63 specifications

The Stow MS-63 is a robust and versatile machine designed for a range of modern engineering and manufacturing applications. This multi-functional machine seamlessly combines precision with power, making it a valuable addition to any workshop or production line.

One of the standout features of the Stow MS-63 is its advanced control system, which allows for unparalleled ease of use and adaptability. The machine is equipped with a state-of-the-art digital interface that provides real-time monitoring and management of operations. This feature ensures that operators can easily adjust settings to accommodate various tasks without extensive technical knowledge. Users can also program complex sequences, which increases efficiency and reduces the likelihood of errors.

The MS-63 boasts a heavy-duty construction, with high-quality materials that ensure durability and longevity. The frame supports rigorous use, and its design minimizes vibrations during operation, resulting in smoother processes and enhanced precision. Additionally, the machine is engineered with safety in mind, incorporating multiple safeguards to protect operators during use.

In terms of technology, the Stow MS-63 is equipped with cutting-edge automation capabilities. It can integrate with a variety of sensors and robotics, facilitating automated workflows. This level of automation not only speeds up production but also allows for real-time data collection and analysis, helping businesses optimize their processes and improve output quality.

The Stow MS-63 is designed to handle various materials, making it suitable for diverse industrial applications, from metalworking to wood processing. Its versatility is enhanced by a selection of attachments and tools, which can be easily swapped out depending on the task at hand. This adaptability means users can efficiently tackle different projects without needing multiple machines, ultimately saving space and costs.

Moreover, the MS-63's energy-efficient design reflects a commitment to sustainability. By minimizing power consumption without sacrificing performance, this machine aligns with modern industry goals of reducing environmental impact while maintaining high productivity levels.

In conclusion, the Stow MS-63 stands out for its combination of advanced technology, robust design, and versatile capabilities. It represents a significant investment for operators seeking to enhance their manufacturing processes and achieve optimal efficiency in a competitive environment. With its integration of smart technology and commitment to safety and sustainability, the MS-63 is poised to be a leader in industrial machinery for years to come.
Top Page Image Contents