Stow MS120HD13, MS120H13 manual Mixer COMPONENTS/HYDRAULIC Components, Hydraulic Components

MIXER COMPONENTS/HYDRAULIC COMPONENTS

17 18

Figure 4. Mixer Components (Stationary)

17.Adjustable Stabilizer Jack Stands — Use these jack stands (3) to adjust the mixer to the desired height.

18.Forklift Pockets —When lifting of the mixer is required, use these fork lift pockets to lift the mixer. Remember to insert the forks of the forklift a minimum of 24 inches into the lift pockets.This feature is only available on the stationary mixer model.

HYDRAULIC COMPONENTS

Figure 5 illustrates the hydraulic components used on the mixer.

1.Hydraulic Motor — Bi-directional hydraulic motor that is used in conjunction with the directional control valve to operate the hydraulic dump cylinder and paddle shaft.

2.Hydraulic Dump Cylinder — When activated, this cylinder will cause the mixing drum to rotate to the dump position.This cylinder is provided only on mixers with hydraulic dump capability only.

3.Hydraulic Oil Sight Gauge — This gauge indicates the level and temperature of the hydraulic oil. For normal operation oil level should be visible at the midpoint on the sightglass.

4.HydraulicValve — Directional hydraulic control valve. Controls the direction of hydraulic fluid supplied to the dump cylinder and paddle shaft.

Figure 5. Hydraulic Components

5.Hydraulic Dump Lever — This lever is provided on mixers with hydraulic dump capability only. Pull lever outward to activate dump cylinder.

6.Hydraulic Paddle Blade Lever — 3-position lever. Push inward for clockwise mixing rotation of blades. Place in center position for no rotation (neutral/off).

7.Pump — Supplies hydraulic fluid to the hydraulic control valve.

8.Hydraulic Oil Filter — 10 micron hydraulic filter. Filters out small particles that are harmful to the hydraulic system.

9.Strainer — Filters out large particles and debris that are harmful to the hydraulic system.

Figure 5 shows configuration for electric motor. Gasoline engine is configured in the same manner.

MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 17