MS15H/MS15E MIXER — MAINTENANCE (MIXER)

MAIN GEAR AND DRIVE PINION ALIGNMENT

1.Disconnect the spark plug wire (gasoline engines). If mixer is equipped with an electric motor remove power cord from AC power receptacle. In addition make sure the clutch engagement lever is dis-engaged to relieve V- belt tension.

2.The countershaft and drive pinion are mounted on a slotted base.To align drive pinion with main gear, loosen the pillow block mounting bolts and move them until the necessary alignment has been made. Remember gears must be paralleled aligned not skewed.

3.Using your hand, slightly move (rock) the drive pulley back and forth to determine the amount of backlash. Insert feeler gauge between gears to determine backlash distance. Backlash should range between 0.007- 0.012 inches (Figure 19).

GEAR LUBRICATION

The surface of the pinion and main gear (Figure 21) should be very lightly greased.

Grease main and pinion gears every 250 hours of operation.

NOTEIMPORTANT! avoid over- greasing. Excess grease will accumulate contaminates and cause premature wear.

Figure 19. Drive Pinion and Main Gear (Backlash)

INSPECT TOOTH CONTACT BETWEEN MAIN GEAR AND DRIVE PINION

1.Coat 3 or 4 teeth at 3 different positions on the main gear with yellow paint.

2.Rotate the drive pulley in both directions.

3.Inspect the tooth pattern.

4.If gear teeth are not contacting properly (Figure 20), adjust pillow block to correct the problem.

Figure 21. Pinion and Bull Gear Lubrication

CLEANING

CAUTION

Cleaning the Mixer

 

 

Always disconnect the spark plug wire before cleaning the inside of the drum.

NEVER pour or spray water (Figure 22) over the gasoline engine or electric motor.

For consistent performance, long life and high quality mixing, thoroughly clean the mixer inside and out at the end of each day’s operation. To prevent lumps of dried mortar from forming and contamination of future batches, do not allow a buildup of materials to form on the blades or anywhere inside the drum.

Figure 20. Gear Teeth Alignment

Figure 22. No Spraying of Water

PAGE 26 — MQ STOW MS15H/MS15E MIXER — PARTS & OPERATION MANUAL — REV.FINAL (08/10/06)

Page 25 Page 27
Page 26
Image 26
Stow MS15H5.5 manual MS15H/MS15E Mixer Maintenance Mixer
Page 25 Page 27

MS15E, MS15H5.5 specifications

The Stow MS15H5.5 and MS15E represent advanced options in the realm of industrial cleaning machinery, specifically designed for effectiveness and efficiency in various cleaning applications. These models cater to the demands of different environments, such as warehouses, retail spaces, and manufacturing facilities.

The MS15H5.5 is powered by a robust Honda engine, delivering superior cleaning power while ensuring reliability and longevity. This model features a high-pressure washer that efficiently tackles tough grime and stains, making it ideal for heavy-duty cleaning tasks. The Honda engine is known for its fuel efficiency, allowing for longer operational use without frequent refueling. It boasts a durable design with a reinforced steel frame, providing stability and toughness to withstand rigorous use.

On the other hand, the MS15E is an electric model that offers a quieter alternative for cleaning operations where noise reduction is crucial. This electric version is equipped with a powerful motor that provides consistent pressure for effective cleaning. The MS15E is valued for its ease of use and lower maintenance requirements compared to its gas-powered counterpart. Users appreciate its lightweight construction, which makes it easily maneuverable for various cleaning tasks.

Both the MS15H5.5 and MS15E incorporate advanced technology features such as an adjustable pressure setting, giving users better control over the cleaning intensity based on the surface being cleaned. This feature not only enhances cleaning efficacy but also extends the lifespan of the equipment and surfaces being serviced.

Safety is another critical aspect of both models. They come equipped with thermal relief valves that prevent overheating, ensuring safe operation during prolonged use. The ergonomic design of the handles and controls provides comfort to the operator, reducing fatigue during extended periods of cleaning.

In summary, the Stow MS15H5.5 and MS15E are versatile cleaning machines that excel in performance, durability, and user-friendliness. Whether powered by gas or electricity, these models are designed to tackle various cleaning challenges effectively, making them valuable assets for any cleaning operation.
Top Page Image Contents