MS15H/MS15E MIXER — MAINTENANCE (MIXER)

Drum Head Seals

There is 1 set of drum head seals (Figure 15) that will require lubrication.

 

CAUTION

IMPORTANT- DRUM HEAD

 

SEAL CARE

 

 

 

Grease seals every 40 hours of operation using any grade #1 lithium base grease. Apply grease until visible of mixing tub (over grease).This will purge seal system of contamination.

Figure 15. Grease Fittings (Drum Head Seals)

CAUTION

Lubricating the

Grease Fittings

 

 

Failure to lubricate the drum bearing grease fittings periodically will cause the dumping mechanism to stiffen, making the mixing drum hard to dump.

Countershaft Bearing Lubrication

There is 1 set of countershaft bearings (Figure 17) that will require lubrication. Lubricate the grease fitting for each countershaft bearing every 40 hours of operation using any grade lithium base grease.

Drum Bearing Bracket Lubrication

There is 1 set of drum bearing brackets (Figure 16) that will require lubrication. These brackets are intended to make the drum rotate freely. Lubricate the grease fitting for each drum bearing bracket every month or when the drum becomes difficult to position using multi-purpose grade grease.

Figure 16. Grease Fittings (Dumping Mechanism)

Lubricating the

CAUTION Zerk Grease Fittings

Figure 17. Grease Fittings (Countershaft)

Grease Fittings (Zerk) Maintenance (Electric Motor)

1.There are two grease (Figure 18) fittings at each end of the electric motor that will require lubrication. Lubricate these fittings about every 16 months.

2.Use Poleyrex EM (Exxon Mobil) or equalivant lubricant. Clean grease fitting, apply grease gun to fitting (1/2 shot). Remember too much grease or injecting grease too quickly can cause premature bearing failure. Slowly apply the recommended amount of grease, taking a miniute or so to apply.

Figure 18. Grease Fittings Electric Motor

Failure to lubricate the zerk grease grease fittings periodically will cause the dumping mechanism to stiffen, making the mixing drum hard to dump.

MQ STOW MS15H/MS15E MIXER — PARTS & OPERATION MANUAL — REV. FINAL (08/10/06) — PAGE 25

Page 24 Page 26
Page 25
Image 25
Stow MS15E, MS15H5.5 manual Drum Head Seals, Countershaft Bearing Lubrication, Drum Bearing Bracket Lubrication, Lubricating
Page 24 Page 26

MS15E, MS15H5.5 specifications

The Stow MS15H5.5 and MS15E represent advanced options in the realm of industrial cleaning machinery, specifically designed for effectiveness and efficiency in various cleaning applications. These models cater to the demands of different environments, such as warehouses, retail spaces, and manufacturing facilities.

The MS15H5.5 is powered by a robust Honda engine, delivering superior cleaning power while ensuring reliability and longevity. This model features a high-pressure washer that efficiently tackles tough grime and stains, making it ideal for heavy-duty cleaning tasks. The Honda engine is known for its fuel efficiency, allowing for longer operational use without frequent refueling. It boasts a durable design with a reinforced steel frame, providing stability and toughness to withstand rigorous use.

On the other hand, the MS15E is an electric model that offers a quieter alternative for cleaning operations where noise reduction is crucial. This electric version is equipped with a powerful motor that provides consistent pressure for effective cleaning. The MS15E is valued for its ease of use and lower maintenance requirements compared to its gas-powered counterpart. Users appreciate its lightweight construction, which makes it easily maneuverable for various cleaning tasks.

Both the MS15H5.5 and MS15E incorporate advanced technology features such as an adjustable pressure setting, giving users better control over the cleaning intensity based on the surface being cleaned. This feature not only enhances cleaning efficacy but also extends the lifespan of the equipment and surfaces being serviced.

Safety is another critical aspect of both models. They come equipped with thermal relief valves that prevent overheating, ensuring safe operation during prolonged use. The ergonomic design of the handles and controls provides comfort to the operator, reducing fatigue during extended periods of cleaning.

In summary, the Stow MS15H5.5 and MS15E are versatile cleaning machines that excel in performance, durability, and user-friendliness. Whether powered by gas or electricity, these models are designed to tackle various cleaning challenges effectively, making them valuable assets for any cleaning operation.
Top Page Image Contents