Problem | Possible cause | Page |
The picture does | B The signal format | 43 |
not display | correctly. |
|
correctly. | B There may be a problem with the video tape or | – |
| other signal source. | 68 |
| B A signal which is not compatible with the projector | |
| may be being input. |
|
|
|
|
Picture from | B The cable may be too long. | – |
computer does | B The external video output for the laptop computer | 69 |
not appear. | may not be set correctly. |
|
| (The actual method varies depending on the type |
|
| of computer, so refer to the documentation |
|
| provided with your computer for further details.) |
|
| B If an PC INPUT indicator is turned off, the video | 14 |
| signals may not be output from the computer. |
|
| B “PC2 SELECT” in the “OPTION” menu is set to | 50 |
| “OUTPUT” when the signals are input to PC 2 |
|
| IN/PC 1 OUT connector. |
|
|
|
|
Cleaning and maintenance
Before carrying out cleaning and maintenance, be sure to disconnect the mains plug from the mains socket.
Wipe the cabinet with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in water with a small amount of neutral detergent in it, squeeze the cloth very well, and then wipe the cabinet. After cleaning, wipe the cabinet dry with a dry cloth. If using a
Do not wipe the lens with a cloth that is dusty or which produces lint. If any dust or lint gets onto the lens, such dust or lint will be magnified and projected onto the screen. Use a blower to clean any dust and lint from the lens surface, or use a soft cloth to wipe off any dust or lint.
